Interior Mounted Perforated Window Vinyl is a one-of-kind One-Way Vision Perforated Window Film designed to be printed on the adhesive side. The product features a revolutionary coating. It is both an adhesive and an ink receptive coating.
The technology allows retailers to interior mount our perforated film in a single step using the printed side of the graphic. There is no need for additional adhesives or mounting tapes.
Key Features & Benefits
-
Most affordable, complete solution for interior mount perforated window film.
-
Interior window graphics are protected from the elements and vandals.
Product Specifications
Media Roll Size:
-
54" x 82' (max print size 52" x 240"),
One Way Vision - Perforated Vinyl Characteristics:
-
Perforated 7 mil white vinyl with a adhesive to allow for inside see-thru viewing.
-
Perforated 30% printable area, 70% open area, and featuring a 1 mil poly liner.
-
This film is durable for up to 3 years.
-
Designed for flat or curved window surfaces.
-
Self Stick Adhesive vinyl film, applied on the outside of the window, no special glue needed. Experienced installer recommended
-
Perforated vinyl is water proof and washable.Contains anti-mildew chemicals, Moisture Resistance and UV fade resistance stabilizers.
Please note: due to the nature of vinyl characteristics, a discrepancy of up 1" is possible when producing large scale sizes. Vinyl can shrink from heat, or when rolled or folded in shipping.
Product Weight:
-
0.13 oz per square meter. (0.08 per square foot)
Printing Resolution:
-
Full Color Printing in CMYK mode.
-
Printed at 1440 dpi in 4 color process.
Standard Printing Turn Around Time:
-
Upon Graphic Approval of Proofs, 5 Business Days. (turn around times are subject to change if proof approval is delayd)
-
Rush Printing is available for additional charge.
Warranty:
Apply to Clean and Dry interior glass only. Temperature of glass exterior should be above 40 degrees.
The adhesive sticks much better to warm glass. Starting at the top, while holding the graphic away from the glass, tack the top edge so it is straight. Begin working down the graphic with a smooth squeegee, roller or hand, moving the back liner as you go until the graphic is fully applied. The graphic can be removed and re-applied if needed. It will leave no residue on glass. A small amount of residue may remain when removed from Plexiglas or Lexan. This can be easily removed with glass cleaner.
.gif){kind=small}
.jpg)
.jpg)
.jpg)
Product Selection Guide.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg)
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}