Product Specifications

Media Roll Size:

• 102" x 164' (max print size 100" x 150'),
• 122" x 164' (max print size 124" x 150'),
• 198" x 164' (max print size 196" x 150').

Bigger size backdrops can be created by sewing smaller panels together with double stitch machine to create one large backdrop up to 200' x 300' feet.

 Vinyl Poly Poplin Fabric Characteristics: 

• Poly Poplin Backdrop Banners is a favorite for step and repeat banners, trade show banners, event banners, table throws and fitted table clothes.
• 100% polyester woven fabric with a soft feel and matte, "canvas like" texture; It is an excellent material for full color top quality printing.
• Poplin Backdrop banners are wrinkle-resistant and washable.
• Meets the NFPA-701 flame test.
• Contains anti-mildew chemicals, moisture resistance and UV fade resistance stabilizers.

Please note: due to the nature of vinyl characteristics, a discrepancy of up 2" is possible when producing large scale banner sizes. Vinyl can shrink from heat, or when rolled or folded in shipping.

   Fire Retardant:

•   All our vinyls are flame retardant, Meets NFPA701, CA Fire Marshall, NYC (MEA) (certificates available)

   Product Weight: 

• 0.07.1 oz per square meter.   

Printing Resolution: 

• Full Color Printing in CMYK mode.
• UV Printer is 1000 DPI

Standard Printing Turn Around Time: 

• Upon Graphic Approval of Proofs, 5 Business Days. (turn around times are subject to change if proof approval is delayd)
• Rush Printing is available for additional charge.

Warranty:  

• UV Prints is with 3M UV ink and have a 5 Year fading warranty of no more than 15%.

A vinyl banner can last for years if you care for it and store it properly. Here is how to clean and store your banner to make sure it lasts as long as possible.

Removing Creases from the banner sign: 

•  Outdoor Banner Installations: When a banner is installed outdoors and nicely stretched and secured, the crease will come out from the sun rays in 24-48 hours.
• Indoor Banner Installations: Removing the creases from the vinyl banners is very simple. The equipment you need for removing the creases are a clothing iron and a wet cotton cloth. Just place the vinyl banner in a flat surface, and place the wet cotton cloth over it. Once this is done, iron the wet cotton cloth placed over the banner. The steam produced during this process will eliminate the creases in the banner. Proper care should be taken that the cloth iron doesn't make any direct contact with the banner which will result in permanent damage of the banner.
• A hair blow dryer or a heat gun will remove the creases as well, Proper care should be taken that the equipment doesn't make any direct contact with the banner which will result in permanent damage of the banner.

 Vinyl Banner Cleaning:

•  Keeping your banner clean puts out a good impression. Our full-color printed banners are a snap to care for. Echod Graphics recommends using a non-detergent, when needed to clean your vinyl banner. Do not use detergents or other aggressive cleaners, as they can destroy the color print. Use a non-abrasive cloth and avoid all cleaning pads.  
• Vinyl banners must be cleansed with wholly un-abrasive methods. It is incumbent not to use any solvents when cleaning your custom vinyl banners. We suggest wiping down your full color banner with a damp and soft cloth, ensuring not to use any abrasive cloths or paper towels when doing so.
• If your damp cloth with water will not do it and you need to get it cleaner, we suggest you use a mild soap/water solution on your banner. If you do use some soap, make sure that you remember to rinse with water completely to ensure that all of the soapiness is removed.
• It is very important not to use any severe or harsh cleansers or solvents of any kind. Because it may affect the quality of your custom banner. Also, be certain your vinyl banner is dry before putting your custom banner in storage.

Storing your Vinyl Banner:

•  Make sure that you are storing your banners properly when you have to put them away. You want to make sure that you are not folding the banner ink to ink, putting the printed side of ink touching the other side of ink will potentially stick together and damage the print.
• Roll up each banner individually with the print inside and the white back side on the outside, or put newsprint between banners if you’re rolling several together.
• Make sure to place a piece of foam or paper between the first fold or in the begining of rolling up the banner so the inks do not touch.
• Store the banner in a tube. Once you’ve rolled your banner, put it inside the original shipping carton, or buy a large tube.
• Control the temperature. Don’t store the banner in very hot place or where it will be exposed to the sun, or in a very cold place, like your car trunk or a storage unit. Room temperature and dry location is best for prolonging the life of the ink and the banner itself.

Click Here for Poly Poplin Fire Certiface Download NFPA701 Test #2

Click Here for Poly Poplin Fire Certiface Download Title 19 & CSFM

Click Here for Poly Poplin Fire Certiface Download ASTM E84

Click Here for Poly Poplin Technical Data Sheet Download  

Quantity Discounts

Discounts of our published website prices apply to quantity purchases of the same banner print and banner size.

Buy 10 to 20 and save 10%

Buy 21 to 50 and save 20%

Buy 51 to 100 and save 25%

Buy 101 to 500 and save 30%

Buy 501+ and save 35%